- Kapasitas adalah 45 T TBS/jam den

- Kapasitas adalah 45 T TBS/jam dengan ukuran lebar 1200 mm
- Scrapper dibuat dari besi pipa steam SCH 40  3” dan dipasang setiap jarak 6 pitch ( 900 mm ).
- Scrapper akan dibautkan pada dua jalur rantai yang bergerak pada rel.
- Rantai ukuran 6” pitch type solid pin 50.000 lbs
- Kecepatan conveyor adalah 18 meter per menit.
- Talang conveyor dibuat dari pelat besi setebal 8 mm dan dikonstruksikan dengan sambungan las.
- Tiang penyangga conveyor dibuat dari besi UNP 125/100 dan diberikan Brancing dari besi siku 65 x 65 x 6 mm.
- Digerakkan dengan 30 HP geared motor melalui rantai dan sprocket duplex 1½”.
- Dilengkapi dengan platform untuk perawatan sepanjang conveyor serta pagar dari pipa hitam 1¼” dan 1”.
- Lantai platform dibuat dari bahan expanded metal sepanjang conveyor.
- Dilengkapi dengan corong pengembali ke inclined bunch conveyor.
- Akan dilengkapi dengan 3 (tiga) buah chute yang digerakkan dengan hydraulic cylinder untuk pengisian TBS ke sterilizer.

결과 (영어) 1:

-The capacity is 45 T FFB/hour with sizing width 1200 mm -Made of iron pipe Scrapper steam SCH 40  3 "and installed at any distance 6 pitch (900 mm).-Scrapper will dibautkan on two lanes of the chain that moves on Rails.-The chain size 6 "pitch type solid pin 50,000 lbs-Conveyor Speed is 18 meters per minute.-Talang conveyor made of iron plates as thick as 8 mm and is constructed with a welded connection.-Pole buffer conveyor made of steel UNP 125/100 and given Brancing of the iron elbow 65 x 65 x 6 mm.-Up to 30 HP geared motor via the chain and sprocket duplex 1½ ".-Equipped with a platform for treatment along the conveyor and the fence of the black pipe 1¼ "and 1".-Platform Floor made from expanded metal along the conveyor.-Equipped with funnels Restorer to inclined conveyor bunch.-Will be equipped with three (3) fruit chute which is driven by hydraulic cylinder for TBS charging into the sterilizer.

결과 (영어) 2:

- The capacity is 45 T TBS / hour with width 1200 mm
- Scrapper made ​​of iron steam pipe SCH 40  3 "and installed every sixth pitch distance (900 mm).
- Scrapper will be bolted on a two-lane chain that moves on rails.
- chain size 6 "pitch pin type solid 50,000 lbs
- is a conveyor speed of 18 meters per minute.
- Gutter conveyor is made ​​of 8 mm thick steel plate and constructed with welded joints.
- Pole buffer conveyor is made ​​of iron UNP 125/100 and given brancing of angle iron 65 x 65 x 6 mm.
- Powered by 30 HP geared motor through a chain and sprocket duplex 1½ ".
- Equipped with a platform for the treatment of a fence along the conveyor and black pipe 1¼ "and 1".
- Floor platform made ​​of expanded metal along the conveyor.
- Equipped with a funnel Protects bunch inclined to the conveyor.
- It will be equipped with three (3) pieces chute actuated by hydraulic cylinder for charging TBS to the sterilizer.